Board Selection
Choose your hardware
⌄
Firmware status
—
Release notes
Releases
Flash the latest build to your ESP32
First time setup - Connect via USB, select the correct board below, optionally provide WiFi credentials, and then flash. WiFi setup via AP mode (SSID OFS.local) will need to be completed if credentials not applied.
Updates Only - Use the 'Download OTA Files' option instead to get the required files. Same WiFi considerations as option 1.
WiFi override
Patch SSID & password
This step is optional. You can provide your WiFi SSID and password in this form to skip AP setup. This uses a script to patch the released binary file in place on the fly - the form entry and patched binary are local to your browser - they are not transmitted outside of your local environment. If you are not comfortable with this, simply do not use this feature.
Click "Accept and provide credentials" to begin the optional patch.
Deploy
Flash via Web Serial
- Plug your ESP32 into this machine with a data-capable USB cable.
- Use Chrome, Edge, or any browser with Web Serial enabled.
- Click Flash firmware, pick the serial port, and confirm.
Update OTA
Download files, unzip, and open the readme.
- Download the OTA package.
- Unzip and read the included instructions.
- Apply files per the readme.
Notes
Flash Output
Live console
Click “Flash firmware” to begin capturing installer output.